Mini Excavator Attachments

Measure the diameter of the pins that hold your current bucket to the stick and link, then match that number to the pin size printed in the JMA product name. Pin size climbs with machine weight, from 25mm on the smallest units to 50mm at the top of the mini range, but it is set by the machine, not the weight class, so always go by what is on your stick.

JMA carries buckets, brush rakes and ripper teeth built for Kubota Wedge Lock, John Deere Wedge Lock and Bobcat X-Change coupler styles, listed with the machine weight class they suit. For tools not offered in your coupler style, choose the pin-on version that matches your pin size and stick width, or run it through a manual quick coupler sized for your machine.

Yes. JMA offers manual quick couplers for 1-2 ton (30mm pins), 2-3 ton (35mm), 3-4.5 ton (38mm or 40mm) and 4-5 ton (40mm) mini excavators. The coupler pins to the stick and link, and pin-on attachments with the matching pin size then lock into it, so you can swap between a bucket, thumb, rake or ripper without pulling pins each time.

Match the bucket to the cut. A narrow trenching bucket removes only the soil a pipe or footing needs, so backfill and restoration stay small. A ditching bucket is the wide, smooth-edged choice for grading, cleaning ditches and finishing slopes. For general excavation and harder ground, a digging bucket or heavy duty digging bucket in your weight class does the work.

JMA lists a 407 joule hydraulic hammer for 1-2.5 ton mini excavators, a 1,018 joule hammer for 4-7 ton machines, and 1,000 and 1,356 joule hammers for 7-10 ton carriers. For driving posts rather than breaking, there are 350 joule and 500 joule post driver hammers for 1-4.5 ton and 3-6.5 ton mini excavators and skid steers. Your machine needs an auxiliary hydraulic circuit to run a hammer; match it to your carrier’s weight class rather than going bigger than the machine can carry.

Yes. JMA stocks attachments in Miami, Florida and ships across the United States. Orders go out by FedEx and UPS, and orders confirmed before 2 PM ET ship the same business day; items over 50 lbs ship by LTL freight. You can order any attachment directly online from the product page.

All JMA mini excavator attachments are made from AR400 abrasion-resistant steel, a hardened plate grade used for buckets, rakes, thumbs and rippers that see constant contact with soil, rock and debris. The wear parts on our buckets are OEM-style: Caterpillar-style, Hensley-style and ESCO-style teeth and Komatsu-style side protectors, so replacements are widely available and easy to match.

Every attachment is covered by a 2-year warranty, and the welds carry a lifetime warranty. Wear parts such as teeth, side cutters and side protectors are consumables and are not covered by either warranty. If you need a replacement wear part we do not have in stock, our US suppliers deliver it to Miami in 24 to 48 hours or ship it from a location near you.

Yes, both. Our shop in Miami modifies existing products in-house, for example re-bushing pins from 70mm to 80mm, converting a pin-on head to a quick coupler head, or changing a bucket’s teeth to another style such as 1U3202RC to 1U3202F. For a fully custom attachment, we take a 10% deposit, send you a drawing and specs to approve, and deliver in about 60 to 90 days. Contact us with your machine model, pin size and the job you need done.