Go to cart
165 mm Hydraulic Breaker Blunt Chisel for JMASB131EBH Hammers
- Fits the JMASB131EBH hydraulic hammer
- 165 mm blunt chisel · 40CrMo steel · heat-treated, anti-rust finish · 497 lb
- Ships from Miami, FL the same business day when ordered before 2 PM ET · US-based support
Goes with the JMASB131EBH hammer
The hammer
| Bit Width (mm) | 165 mm |
|---|---|
| Finish | Advance Heat Treatment Anti-Rust |
| Handling Unit | Pallet |
| Industries | Demolition & Recycling, General Construction, Mining & Quarry, Road & Highways |
| Material Type | 40CrMo |
| Product Weight (kg) | 225 kg |
| Product Weight (lbs) | 497 lbs |
| Shipping Height (in) | 20" |
| Shipping Length (in) | 48" |
| Shipping Weight (kg) | 252.22 kg |
| Shipping Weight (lbs) | 556.04 lbs |
| Shipping Width (in) | 40" |
165 mm Hydraulic Breaker Blunt Chisel for JMASB131EBH Hammers. Fits the JMASB131EBH hydraulic hammer. Price: $5,037.00, in stock, ships from Miami, FL the same business day when ordered before 2 PM ET.
Step up to the 165 mm (6.50") blunt chisel when your SB131-class breaker needs the widest tamping face in the line. At 497 lbs of forged 40CrMo alloy with an advanced heat-treatment anti-rust finish, it takes on the toughest demolition, quarry and road-breaking without chipping or mushrooming. The oversized blunt point spreads impact for compaction and heavy slab work. Seat it in the matching tool bore. Ships palletized from Miami, FL with US-based support and a 2-year warranty.
How do I know this part fits?
Hammer parts fit by hammer model. Match the JMASB model on your hammer's plate, or send us a photo of the plate, and we confirm the fit before shipping.
How fast does it ship?
In-stock items ship from Miami, FL the same business day when ordered before 2 PM ET; orders after 2 PM ET, on weekends or on holidays ship the next business day. Carrier estimates for the lower 48, in business days from the ship date: parcels of 50 lb or less go FedEx, UPS or USPS, tracked, 5–7 standard or 2–4 expedited; heavier parts go LTL freight, 7–10 standard or 4–6 expedited.
Is it covered by the warranty?
Hammer parts follow the hammer warranty table on the Warranty page: through bolts, bushings and rod pins 2 months; seal kits and diaphragm 3 months. Chisels follow the manufacturer's standard. Get our written approval before any repair.
Can I return it?
Yes, if it is in the same condition we shipped it, or if it has a factory defect: a refund within 14 calendar days of delivery, or store credit within 30. Get a Return Authorization Number (RAN) from us first. A restocking fee applies to non-defective refunds. Ordered the wrong part number? You choose: an exchange, store credit, or a refund less the 25% restocking fee. Check the part number before you order, or send us the part number and we check it first.
DISCLAIMER
JMA Attachments provides heavy machinery attachments that must be used with care by
competent individuals under supervision, if necessary. Use of any equipment, including ours, involves
potential risk of injury. You accept and assume full responsibility for any and all injuries, damages
(both economic and non-economic), and losses of any type that may occur, and release JMA Attachments,
its insurers, employees, officers, directors, associates, and agents from all claims and liabilities
resulting from the use of said equipment.
Except for the written JMA Attachments Warranty (/warranty/), JMA Attachments makes no other warranty, express or implied, including merchantability or fitness for a particular purpose. BUYER ASSUMES ALL LIABILITY IN THE USE OF THE EQUIPMENT. The purchaser must ensure operators are properly trained and comply with all laws and regulations. You agree to be legally bound by this disclaimer by purchasing and using our products. If you disagree, do not proceed with purchasing or using the equipment.
Similar Items
Customers Review
Be the first to leave a review!
Reviews
There are no reviews yet.